Air conditioning is essential equipment in commercial and corporate environments

There is no way to be productive or to rest at very high temperatures. But to have the air conditioning fully available, it is necessary to pay attention to the installation. Such an air conditioning installation can only be done by a trained and specialized professional and after all, the appliance has a complex operation. For example, in order to install a split air conditioner, it is necessary to study where it will be placed and to do the thermal calculation of the environment only after that actually install it.

Check out the special tips we have to help you with your air conditioning installation

It is necessary to check the installation environment of the air conditioning and after all, the capacity of it is linked to the incidence of sun in the place as well as its size. The capacity, measured in BTU, is the unit of measurement used and that determines the power of the device. In Split appliances, one part of the air conditioner is in the room and the other is out. So, take a look at how much sunshine hits the spot to determine how many BTUs are needed in that particular case. In order to know more about Air conditioning installation Geelong, you can always seek the online help.

Electrical installation and drain attention to these two factors

Analyze the voltage of the equipment according to the available location. If the electrical supply has the voltage that the device needs, be it 127v or 220v, one can do the installation of air conditioning. You also need to drill through the drain, which channels the condensed water flowing from the equipment. It cannot get too high or curved as this makes it difficult to exit, causing water to fall into the environment.

To install a split air conditioner, you will need the following things

  • Refrigeration tubing, i.e. aluminum or copper tubes with gauges and thicknesses according to the capacity of the environment.
  • Piping for electrical installation, which consists of piping sized according to the capacity and wiring required to install the air conditioner
  • Drainage pipes, which are PVC pipes that connect to the storm drain of the house.
  • Thermal insulation   important for operation

The air conditioner has copper tubes that are thermally insulated, used to conduct the refrigerant air to the condenser and evaporator units. Therefore, to isolate, it is necessary to have elastomeric foam, which avoids problems such as heat gain in copper pipes, for example. Since we are talking about air conditioning facilities, check out this post on our blog that talks about how an air conditioning installation and maintenance course can help you make more money.

Comments are closed.

  • Partner links